How To Change WiFi Password?


In the event that you need to change the default switch WiFi secret word, follow this bit by bit control.


Play Live Video :-  ▶ Play Video


TP-Link:

  1.   Login to Router administrator board utilizing its default IP Address – 192.168.0.1/192.168.1.1. 
  2. Enter the default username and secret phrase (administrator/administrator much of the time).
  3. Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password .
  4. Enter your preferred password and Save the change.


D-Link:

  2. Login to your switch settings page through its default IP Address – 192.168.1.1/192.168.0.1 
  3. Information your username and secret word (or here's rundown of default username and secret phrase). 
  4. Go to Wireless > Wireless Security > Security Mode set to WPA2 just > Pre-Shared Key: enter your favored secret word. 
  5. Apply the change > restart your WiFi and the new secret word will be applied.



NETGEAR:

  1. Open your router setup page using its default IP address – 192.168.1.1 / 192.168.0.1 / http://routerlogin.com/.
  2. For authentication enter default username and password.
  3.  Go to Wireless > Security Options > Select WPA2-PSK [AES] > Now enter your favored secret key in Passphrase. 
  4. Apply risks and reboot your WiFi for changes to impact.


How to Login to 192.168.1.1?

To login into 192.168.1.1, follow these means: 

  • Interface with your switch's organization. 
  • Open an internet browser, 
  • Type http://192.168.1.1 or 192.168.1.1 in the location bar. 
  • A login page will show up requesting to enter the username and secret phrase. 
  • Enter the default username and secret phrase for the Admin Panel. 
  • You will be currently signed in into the administrator board of your switch. 
  • You can design your switch settings from that point. 


Fizzled (Forgot) to recollect IP Address Username and Password?

If you have neglected to recollect the username and moreover secret key for 192.168.1.1 login page or don't have even the remotest clue about the username and mystery key then you should; 

If you just bought another switch and haven't the foggiest about the default username and secret expression then you should check the packaging mark for username and secret word which is for the most part arranged near the switch's constant number. You can moreover check the manual also. 

If you had changed the mysterious word and have neglected to recall it, by then you should play out a creation line reset on your switch which will reset everything to the plant settings. 

How to creation line reset your switch?

  • Quest for a little covered catch on the back of the Router. (It is for the most part named as reset)
  • Press and hold the little catch for 10-15 seconds utilizing a sharp article, for example, a paper cut or a toothpick 
  • The entirety of the settings will be changed to the defaults. 
  • You would then be able to sign in utilizing the default username and secret phrase.